Skip to content
Register Sign in Wishlist

Matrix Methods in the Design Analysis of Mechanisms and Multibody Systems

£56.99

  • Date Published: May 2013
  • availability: In stock
  • format: Hardback
  • isbn: 9780521761093

£ 56.99
Hardback

Add to cart Add to wishlist

Other available formats:
eBook


Looking for an inspection copy?

This title is not currently available on inspection

Description
Product filter button
Description
Contents
Resources
Courses
About the Authors
  • This book is an integrated approach to kinematic and dynamic analysis. The matrix techniques presented are general and fully applicable to two- or three-dimensional systems. They lend themselves to programming and digital computation and can act as the basis of a usable tool for designers. Techniques have broad applicability to the design analysis of all multibody mechanical systems. The more powerful and more flexible the approach, and the less specialisation and reprogramming required for each application, the better. The matrix methods presented have been developed using these ideas as primary goals. Matrix methods can be applied by hand to such problems as the slider-crank mechanism, but this is not the intent of this text, and often the rigor required for such an attempt becomes quite burdensome in comparison with other techniques. The matrix methods have been extensively tested, both in the classroom and in the world of engineering industry.

    • Offers an integrated approach to kinematic and dynamic analysis
    • Matrix techniques presented have broad applicability to the design analysis of all multibody mechanical systems
    • Methods have been extensively tested in the classroom and in industry
    Read more

    Customer reviews

    Not yet reviewed

    Be the first to review

    Review was not posted due to profanity

    ×

    , create a review

    (If you're not , sign out)

    Please enter the right captcha value
    Please enter a star rating.
    Your review must be a minimum of 12 words.

    How do you rate this item?

    ×

    Product details

    • Date Published: May 2013
    • format: Hardback
    • isbn: 9780521761093
    • length: 344 pages
    • dimensions: 260 x 182 x 25 mm
    • weight: 0.9kg
    • contains: 105 b/w illus. 5 tables 65 exercises
    • availability: In stock
  • Table of Contents

    1. Concepts and definitions
    2. Topology and kinematic architecture
    3. Transformation matrices in kinematics
    4. Modeling mechanisms and multibody systems with transformation matrices
    5. Position analysis by kinematic equations
    6. Differential kinematics and numeric solution of posture equations
    7. Velocity analysis
    8. Acceleration analysis
    9. Modeling dynamic aspects of mechanisms and multibody systems
    10. Dynamic equations of motion
    11. Linearized equations of motion
    12. Equilibrium position analysis
    13. Frequency response of mechanisms and multibody systems
    14. Time response of mechanisms and multibody systems
    15. Collision detection
    16. Impact analysis
    17. Constraint force analysis.

  • Resources for

    Matrix Methods in the Design Analysis of Mechanisms and Multibody Systems

    John J. Uicker, Bahram Ravani, Pradip N. Sheth

    General Resources

    Lecturer Resources

    Find resources associated with this title

    Type Name Unlocked * Format Size

    Showing of

    Back to top

    This title is supported by one or more locked resources. Access to locked resources is granted exclusively by Cambridge University Press to lecturers whose faculty status has been verified. To gain access to locked resources, lecturers should sign in to or register for a Cambridge user account.

    Please use locked resources responsibly and exercise your professional discretion when choosing how you share these materials with your students. Other lecturers may wish to use locked resources for assessment purposes and their usefulness is undermined when the source files (for example, solution manuals or test banks) are shared online or via social networks.

    Supplementary resources are subject to copyright. Lecturers are permitted to view, print or download these resources for use in their teaching, but may not change them or use them for commercial gain.

    If you are having problems accessing these resources please contact lecturers@cambridge.org.

  • Authors

    John J. Uicker, University of Wisconsin, Madison
    John J. Uicker is Professor Emeritus of Mechanical Engineering at the University of Wisconsin, Madison. Throughout his career, his teaching and research have focused on solid geometric modeling and the modeling of mechanical motion, and their application to computer-aided design and manufacture, including the kinematics, dynamics and simulation of articulated rigid-body mechanical systems. He founded the UW Computer-Aided Engineering Center and served as its director for its initial ten years of operation. He has served on several national committees of ASME and SAE, and received the ASME Mechanisms Committee Award in 2004 and the ASME Fellow Award in 2007. He is a founding member of the US Council for the Theory of Mechanism and Machine Science (USCToMM), and of IFToMM, the international federation. He is a registered mechanical engineer in the state of Wisconsin and has served for many years as an active consultant to industry.

    Bahram Ravani, University of California, Davis
    Pradip N. Sheth (1944–2009) was born in Vadodara, India. He earned his BE (1965) and MS (1968) in mechanical engineering at Maharaja Sayajirao University, Baroda, India, and his PhD in 1972 at the University of Wisconsin, Madison, where John Uicker served as his advisor. In his research he developed the Integrated Mechanisms Program for the computer-aided design and analysis of multibody mechanical systems. More than 200 industrial and educational organizations worldwide have utilized the system, which was the first of its kind.

    Pradip N. Sheth, University of Virginia
    Bahram Ravani is Professor of Mechanical Engineering at the University of California at Davis. He has served as the chair of the department of mechanical and aeronautical engineering as well as the interim chair of electrical and computer engineering. He is also a member of the graduate programs in biomedical engineering and in forensic science and engineering. Among his honors are the Young Manufacturing Engineer Award from the Society of Manufacturing Engineers, the Gustus L. Larson Memorial Award from ASME for outstanding achievements in mechanical engineering, and the Design Automation Award from the Design Engineering Division of ASME for his lifetime of sustained contributions. He is currently the technical editor of ASME Journal of Computers and Information Science in Engineering. He is a fellow of ASME and is the former chair of its design engineering division. He is also a member of the Society of Automotive Engineers, the International Society of Biomechanics and the Association for Advancement of Automotive Medicine.

Sign In

Please sign in to access your account

Cancel

Not already registered? Create an account now. ×

Sorry, this resource is locked

Please register or sign in to request access. If you are having problems accessing these resources please email lecturers@cambridge.org

Register Sign in
Please note that this file is password protected. You will be asked to input your password on the next screen.

» Proceed

You are now leaving the Cambridge University Press website. Your eBook purchase and download will be completed by our partner www.ebooks.com. Please see the permission section of the www.ebooks.com catalogue page for details of the print & copy limits on our eBooks.

Continue ×

Continue ×

Continue ×

Find content that relates to you

Join us online

This site uses cookies to improve your experience. Read more Close

Are you sure you want to delete your account?

This cannot be undone.

Cancel

Thank you for your feedback which will help us improve our service.

If you requested a response, we will make sure to get back to you shortly.

×
Please fill in the required fields in your feedback submission.
×